Dr. Weil's Vitamin Advisor

Accessories

list view
  • PetSafe Accessory Pack

    PetSafe Accessory Pack

    Repair or Replace your pet’s collar. Need replacement contacts, washers or cover screws for your PetSafe/SportDOG fence collar? Repair your dogs in-ground or wireless fence collar with this PetSafe RFA-281 Accessory Pack Universal Kit.

    More Details
    $12.95
    Loading Updating cart…
  • Nylon Replacement Collar

    Nylon Replacement Collar

    Nylon replacement collars for the following pet fence brands:

    • Contain-A-Pet
    • Dog Watch
    • Invisible Fence
    • Innotek
    • Perimeter
    • Pet Safe
    • Pet Stop
    • Sport Dog
    More Details

    $14.99
    Loading Updating cart…
  • Lightning Protection

    Lightning Protection

    Panamax Lightning Protection Module for Electric Dog Fence

    The boundary wire in your yard acts like a giant antenna drawing in any current transmitted through the ground during a lightning strike, even if that strike is hundreds of yards away. While the protection built into your home as well as your fence transmitter will provide some protection for surges coming through your household wiring, none of that will stop the surge that comes through the boundary wire.

    More Details
    $45.99
    Loading Updating cart…
  • Pet Fence Staples

    Pet Fence Staples

    Cut Your Underground Dog Fence Installation Time in HALF & Avoid The Back Breaking Task of Burying Wire.

    There is no need to spend a weekend burying the wire underground, or paying some one hundreds of dollars to bury the boundary wire when it can be installed above ground in only a matter of an hour or two. Each Box contains 100 Staples – enough to install 500 feet of wire. Our Pet Fence Stable can be used for any brand of underground pet fence.

    Using our Pet Fence Staples you can “Staple” the wire to the ground. Within a matter of 7 – 14 days the root system of your lawn will grow over the wire and hide it completely from view, essentially “Burying” it into the lawn. Not only does this make the installation of your new pet containment systems hassle free, it also eliminates any potential loss of signal that may result from burying the boundary wire under several inches of dirt, not to mention the backaches and blisters it will save you.

    Using Dog Fence Staples is Quick & Easy

    Step 1:

    1. First run your twisted wire from your transmitter out to the beginning of your boundary.
    2. Now “Staple” the twisted wire to the ground by hammering in a wire “Staple” every 5 – 6 feet.
    3. Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? If not go and “Staple” any raised areas before proceeding to the next step. The wire MUST completely touch the ground.

    Step 2:

    1. Next, place a “Staple” where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a “Staple” in the front of and behind the splice to relieve any pressure on the splice)
    2. Now walk the wire to the first corner of your boundary and “Staple” it to the ground. Repeat this step for all four corners of your boundary.
    3. Next go back just as you did with your twisted wire and “Staple” any raised areas down until they are completely flush with the ground.

    It is that simple.

    You have no need to worry about people tripping over the wire because it is completely flush to the ground and will be completely hidden within 7-10 days. You also do not need to worry about your lawnmower cutting the wire as the blades will never get anywhere near the wire. Nobody cuts their lawns to shorter than an inch, with the vast majority of people keeping them at 2″ – 3″ inches, the wire is flush to the ground and cannot be cut.

    These instructions will not be included with your pet fence. You should print this page if you are going to use the Above Ground Installation method.

    There are really only a couple of instances where burying the wire is preferable.

    1. If you are putting a fence into a pasture area where livestock such as horses or cattle will frequent, then you will want to bury the wire as their hooves will create breaks. In this case you will want the wire at least 8 – 10 inches underground.
    2. If you frequently have your yard aerated you will want the wire at least 5 – 6 inches in the ground. Although if you do an above ground installation you can simply avoid the exterior boundaries when performing the aeration.


    Pet Fence Staples for Dog Fence Installation: Use our Pet Fence Staples for Above Ground Installation of Underground Dog Fence Wire. There is no need to spend a weekend burying the wire underground, or paying some one hundreds of dollars.
    More Details
    $15.99 $13.99
    Loading Updating cart…
  • Boundary Flags

    Boundary Flags

    Boundary Flags can be used for any brand of underground pet fence. Boundary Flags are to be used as a visual aid for your pet to help them learn the boundary you’ve determined for them. After about 30 days, you will be able to remove the flags and your pet will know his boundaries. These Flags are on a metal 12 ” staff and measure 2″ x 3″. This is a bundle of 50 flags, enough to mark off up to 500 feet of wire.

    More Details
    $15.99 $8.99
    Loading Updating cart…
  • Invisible Fence Dog Collar

    Invisible Fence Dog Collar

    Perimeter Technologies® Computer Receiver™ Collar for Invisible Fence® Brand Dog Fence System

    GUARANTEED TO WORK With Your Invisible Fence 7K or 10K Dog Fence or Your Money Back!  (excludes Invisible Fence® 800 series)

    More Details

    from $149.99
    Loading Updating cart…
LoadingUpdating…